5 IMPORTANT Tips Spraying With An Airless Sprayer
How to paint interior trim, wood doors, skirting, baseboards, window sills, sashes, & crown molding with an airless sprayer. Paint Life Gear: https://paintlifesupply.com/ Tool links below.
Titan 440 Impact Sprayer: https://t.ly/wFp2
RX-Pro Spray Gun: https://t.ly/MYiF
Titan Airless Tips: https://t.ly/cRTB
Respirator: https://t.ly/OdH2
Spray sock: https://amzn.to/2XSLHB0
Disposable spray suit: https://t.ly/kmYNJ
30” Spray Gun Extension: https://t.ly/wFp2
6” Spray Gun Extension: https://t.ly/RJV4
Tip Saver Tip Organizer: https://t.ly/6MV0l
Airless Hose Whip: https://t.ly/RKRjW
3M M3000 Hand Masker: https://t.ly/mjs0
Disclaimer:
Due to factors beyond the control of The Idaho Painter (or Chris Berry), I cannot guarantee against improper use or unauthorized modifications of this information. The Idaho Painter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Idaho Painter recommends safe practices when working on any structure and or with tools seen or implied in this video. Due to factors beyond the control of The Idaho Painter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from use or improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Idaho Painter.
source
That's really good. I can't get over how little over spray there is when looking at the side view.
Looks like you better grab the wizzy roller cuz you got a bunch of runs coming coming up what are you using a half a gallon per side per door
Complimenti bel lavoro,che misura di ugello usi?
total armatures you remove the hardware you have to cross lap and an extension on a gun is likely to lead to spitting from the tip these guys have no idea of how to paint or prep
Just like prison. Got to stick with your own race 😂. Keep doing what you do chris . Your an inspiration
How you not getting runs on that many pases ?
What overlap would you recommend ?
I can see Christy does a few things like I do, ie door checks first then panels clip the trigger on each stricken to prevent over coating on changing direction and paint frame sequencing as I would with a brush
Great job Chris 👍🇺🇸
Just like AutoBody work….it’s all in the prep.
No prep… no finish!
What sort/number of spray tip did you use on those doors ?
Those windows sills must be thick
U don't do the tops of your doors painting 101 join a union u won't make 12$ n hr u will be at 42
What kind of paint were you using on the trim work?
None of the light fixtures or chandeliers are masked , they are full of overspray . SMH
no red rosin?
What paint did you use for that type of job?
You don' t seem to be getting any overspray, I have been using a Graco 390 airless unit for several months now for water base emulsion paint using varoius tips but cant get my set up right without quite a lot of over spray. Any ideas?
I don't get it?
What paint do you use for trim, is this water based gloss
Why take the time to mask the handles when you could just take them off?
Hello 👋 I'm new here on your page I like to see your work, I very nice, I'm a painter too, and would like to start doing with spray, looks more professional finish, and much quicker, the question is with machine do I by for a beginner? Thanks for your help 👍
Did John say he is using a 310 tip? Do you use that with Emerald urethane? I notice he makes several passes on the same stock. The can says to go with a larger tip, but I feel a 314 or a 214 puts too much paint down.
I have a Graco 490. Works great when I am spraying five gallons but how can I use it when I just need to spray trim or doors with one gallon? The hose sucks that up in not time. What do you suggest?
Put a whip on that spray gun and quit fighting the hose! Put all the doors in one room(with high ceiling) and get some small boards and stand them up and screw them together at the top in a long oval. Paint them standing upright, edges first all the way around, then the faces(inside and out). 2 coats, drying time in between.
Dude, 2 tips, and i dont mean your 310, – yank the hardware and invest in some door stackers. Allows you to spin the door wet, and hit the other side using the hole in the door, (where the handle wont be there, if you pulled it), then stack to dry. Stacking doors in a designated area allows more work space, painting all doors, (both sides), and avoids "silk curtains", due to accidental over spray. Your welcome. 🤙
which one's were the 5 tips?
I paint for a living and get addicted too watching people spray been watching videos since 11 it’s now almost 6pm smdh!!!! Nice video Chris definitely knows what he is doing I feel John sprayed extremely heavy like very very very very heavy ….. like heavy heavy but no one has said anything that I’ve seen . So idk …. but I do know that was effffing heavy as hell….. no matter what material it was I don’t see any material hanging that damn good lol . Hats off to the boss man though very nice technique
What the number of a tip did you use? I guess 109 or 211 may be
All 3 of you change angles of the gun while you spray leaving you with an inconsistant distance. Also too fast for a FF310.