Shutter Priority Mode: The Ultimate Guide
What is Shutter Priority mode? And how can you use Shutter Priority for consistently outstanding results?
In this article, I take you through the ins and outs of Shutter Priority. I discuss:
- What makes Shutter Priority so special
- Common scenarios when Shutter Priority is usefulÂ
- The difference between Shutter Priority and related camera modes (such as Aperture Priority)
- Much more!
Ready to level up your camera settings knowledge? Then letâs dive right in, starting with the basics:
What is Shutter Priority mode?
Shutter Priority is a semi-automatic camera mode that allows you to set the shutter speed and ISO, while your camera sets the aperture.
More specifically, when using Shutter Priority mode, you choose a shutter speed and ISO based on image quality considerations. Your camera will then select an aperture thatâll give you a well-exposed image.
Therefore, when using Shutter Priority, you can maintain a consistent shutter speed â which can be very, very helpful. If youâre photographing action, for instance, you may need the shutter speed to remain above a certain number; thanks to Shutter Priority, thatâs easily done (and you wonât need to spend a lot of time fiddling around with camera settings, either).
The Shutter Priority exposure variables (+ exposure compensation)
As you may be aware, image exposure â that is, brightness â is controlled by three camera settings: aperture, shutter speed, and ISO.
Widen the aperture, lengthen the shutter speed, or raise the ISO, and you end up with a brighter image. Narrow the aperture, increase the shutter speed, or lower the ISO, and you end up with a darker image.
One of the toughest technical aspects of photography is maintaining a balance between these exposure variables. Thatâs what semi-automatic modes like Shutter Priority are designed to do: select the right variable values for a well-exposed shot.
Unfortunately, while camera exposure calculations are generally accurate, there are times when Shutter Priority mode will produce overexposed or underexposed images. For instance, if you try to shoot a snowy landscape, your camera will try to make the snow gray; in the process, itâll underexpose the entire shot by narrowing your aperture too far.
But most cameras offer a way to counter this problem and manually correct Shutter Priority exposures: Exposure compensation. Dial in a bit of positive exposure compensation, and your camera will deliberately widen the aperture to overexpose the shot. Dial in a bit of negative exposure compensation, and your camera will do the reverse.
That way, you can use Shutter Priority on autopilot â but if you check your LCD and notice a touch of over- or underexposure, you can make the necessary changes.
Now, aperture, shutter speed, and ISO are essential parts of the exposure process, but they each have an additional effect worth considering.Â
Aperture adjusts image depth of field (i.e., the amount of the scene thatâs in focus). You can use it to create artistic shallow depth of field bokeh or more conventional deep depth of field effects.
Then thereâs shutter speed, which adjusts your ability to freeze the action. The faster the shutter speed, the better chance you have at getting a sharp shot when photographing moving subjects or when handholding. Slow shutter speeds, on the other hand, are a great way to produce artistic effects by deliberately blurring moving subjects such as water:
Finally, the ISO affects image quality: The higher the ISO, the noisier the photo, so â Iâm going to say this right off the bat â you should always keep the ISO as low as you can.Â
The point here is that you should choose your shutter speed and ISO carefully, and you should always keep an eye on your aperture. Though you technically donât have control over the aperture setting while in Shutter Priority mode, you can force the camera to choose a wider or narrower aperture by increasing or decreasing the shutter speed, respectively.
When should you use Shutter Priority mode?
Shutter Priority is a great choice if you:
- Are photographing moving subjects and need to make sure they turn out sharp
- Are working in rapidly changing lighting conditions
As I mentioned in the previous section, Shutter Priority will ensure you maintain a consistent shutter speed across a series of shots, which can be hugely helpful if youâre worried about coming home with blurry images.Â
For instance, if youâre photographing birds in flight, youâll often need a shutter speed of at least 1/2000s. With Shutter Priority active, you can dial in 1/2000s, pick an ISO, then let your camera choose the aperture needed for a good exposure. You wonât need to worry about monitoring the shutter speed, and while itâs always a good idea to keep an eye on your exposure variables, you can technically just trust your camera to handle the rest. (Of course, you should always check your LCD every so often to ensure youâre not getting over- or underexposed images. In such cases, exposure compensation is your friend!)
And if the light is changing, Shutter Priority becomes even more useful. The sun might go behind clouds, or your subjects might move into the shade â but your camera will maintain the same shutter speed and will adjust the aperture to balance out the exposure.
Of course, Shutter Priority mode, while handy, isnât always the perfect choice.Â
For instance, if you care deeply about the depth of field in an image, itâs generally best to use Aperture Priority mode or Manual mode; that way, you donât rely on your camera to set the aperture. Macro, portrait, and landscape photographers often use Aperture Priority or Manual mode for this very reason.
(Aperture Priority mode lets you dial in the aperture and ISO while your camera chooses a corresponding shutter speed, while Manual mode lets you independently choose the aperture, shutter speed, and ISO.)
Additionally, if the light on your subject is constant but youâre worried about underexposing or overexposing the image, it pays to use Manual mode. You can set your exposure variables, then trust that youâll get a consistent result, even as your subject moves in front of different backgrounds.
Bottom line:Â
Shutter Priority mode can be a solid choice, especially if youâre shooting action, but itâs not always perfect. Sometimes it makes sense to go with Aperture Priority or Manual mode instead!
How to use Shutter Priority mode to shoot action: step by step
To get started with Shutter Priority mode, turn your camera mode dial to the Shutter Priority icon (usually a âTvâ or an âSâ).
Next, consider your subject. What shutter speed do you need to keep it sharp? Walking pedestrians generally require 1/250s or above, while 1/1000s is best for bikers and 1/2000s is good for slower birds in flight. Dial in the minimum shutter speed required for a tack-sharp shot, and set your camera to its lowest ISO value (generally ISO 100).
Point your camera at your subject (to ensure an accurate meter reading), then check the aperture. What value has your camera chosen?Â
If the aperture is too narrow, then you should increase your shutter speed until you get the result you want. (Donât increase it too much, though! Otherwise you wonât have any wiggle room if the light starts to drop.)
And if the aperture is too wide, then you should leave the shutter speed alone but increase your ISO.Â
Make sense?Â
Once you have a good set of exposure variables, take a test shot, then review it on your LCD. If the result is overexposed or underexposed, then dial in some exposure compensation, then take a second test shot. Check it again â and keep following the same process until you get the exposure you want.
And when you do get a good exposure, then enjoy your photoshoot!
How to use Shutter Priority mode to shoot long exposures
Shutter Priority mode is most commonly used for action photography, but you can also use it to capture long exposures with deliberate blur effects.
Youâll need to start by setting your camera to Shutter Priority mode (see above). Make sure your camera is mounted on a sturdy tripod, then dial in your cameraâs lowest ISO and the shutter speed you need for your long exposure.
(What shutter speed is best? That depends on the speed of your subject and the effect youâre after. If youâre photographing fast-moving water, a shutter speed in the 1/30s to 1/10s range can work well. If youâre photographing slow-moving water, youâll probably want to work at 1s or longer, and if youâre photographing clouds as they streak across the sky, 30s is a good choice.)
Check the aperture. In these situations, you generally want to keep your entire scene in focus, so if your camera is giving you a wide aperture â f/4, for example â then youâll probably want to lengthen your shutter speed further.Â
That said, itâs possible to have an aperture thatâs too narrow (you donât want your images to suffer from diffraction), so keep that in mind, too!
Take a test shot. If the exposure is too bright or dark, go ahead and dial in the required exposure compensation.Â
Then proceed with your photos.
Shutter Priority mode: final words
Well, there you have it:
Everything you need to know about Shutter Priority mode. Now that youâve finished this article, you can capture stunning action shots and produce beautiful long-exposure photos.
So get out your camera. Try Shutter Priority. And see what you think!
Do you plan to use Shutter Priority mode on the regular? What will you use it for? Share your thoughts in the comments below!